Project: Shell Oil Daya Bay DN1422 offshore sewage pipe joint anti-corrosion project
Project introduction: The total length of the project pipeline is 30KM, and the pipe diameter is 1422MM
Equipment used: CR2000-120B-14TF

Clean, Consistent, and Flame-Free Metal Joining for HVAC, Copper, and Aluminum Components
Induction brazing and soldering are highly efficient methods for joining metals using a filler material. Unlike traditional torch brazing, induction delivers precise, localized heat to the joint area — making it ideal for applications in HVAC systems, copper piping, electrical contacts, and automotive aluminum parts.
Our induction heating machines ensure repeatable, high-quality joints with faster cycle times and improved safety — all without an open flame.

Project introduction: straight seam length 18M, plate thickness 45MM, heating width 300MM;
The right and left of the weld are heated simultaneously through an 18M long inductor.
Equipment used: CR2000-080B-14TF2

Project Introduction: After the completion of welding, heat treatment should be carried out on the weld position to eliminate the stress.
Equipment used: CR2000-010B-14TF

Project: preheating before welding for emergency pipeline project of qianxinan prefecture of china-burma natural gas pipeline of CNPC
Project Introduction: The total length of the project pipeline is 40KM and the diameter is 1016MM
Equipment: CR2000-015B-

Fast, Clean, and Controlled Heat for Paint, Powder, and Structural Adhesive Curing
Induction heating provides a highly efficient and localized method for coating curing and adhesive activation, offering precise thermal control with rapid heat-up — ideal for paint drying, powder coating, epoxy bonding, or glue line curing.
Whether applied to electric motor housings, automotive body parts, or steel structural components, induction delivers reliable results with reduced cycle times and superior energy efficiency compared to ovens or IR lamps.